Civil Engineering Archive: Questions from May 06, 2023
-
2 answers
-
0 answers
-
0 answers
-
0 answers
-
0 answers
-
2 answers
-
2 answers
-
2 answers
-
0 answers
-
0 answers
-
0 answers
-
Solve the differential equations
\( \left(x^{2}+2 x\right) y^{\prime \prime}+(3 x+1) y^{\prime}+y=0 \)2 answers -
Using the double integration method, prove the following formulas: Maximum beam deflection Slope in support
Evaluación del Comportamiento de los Materiales en estructuras Módulo 3 - Profesor M. Cs. Job Martínez Martínez Examen 3 - Calculo de deflexiones Problema 1 Por el método de la doble integración2 answers -
Por el método de la doble integración demuestra determina: - La máxima deflexión de la viga - La deflexión a 1/3 del claro El modulo elástico es igual a \( \mathrm{E}=1.5\left(10^{3}\right) \mat2 answers -
Problem 1: A wooden column has a square cross-section of width B. It is embedded at its base and FREE at its top end. Determine the maximum load P that can be applied with eccentricity e without causi
Problema 1: La columna de madera tiene una sección transversal cuadrada de ancho B. Está EMPOTRADA en su base y LIBRE en su extremo superior. Determine la máxima carga \( \mathrm{P} \) que puede se2 answers -
Problem 2: The pipe is made of copper (E=120 GPa and Oy= 740 MPa). It has an external diameter of and a thickness t . Using a buckling safety factor of FSb and a creep safety factor of FSy determine t
Problema 2: El tubo está fabricado con cobre ( \( \mathrm{E}=120 \mathrm{GPa} \) y \( \left.\sigma_{y}=740 \mathrm{MPa}\right) \). Tiene un diámetro externo \( d_{e} \) y un espesor \( t \). Usando2 answers -
Problem 3: A beam W is ARTICULATED at both ends. Determine the maximum load P that can be applied such that: It does not fail by buckling due to eccentric load in its strong axis. Does not fail by buc
Problema 3: Un peril W está ARTICULADO en ambos extremos. Determine la máxima carga \( \mathbf{P} \) que puede ser aplicada de tal manera que: - No falle por pandeo por carga excéntrica en su eje f2 answers -
\[ 4\left[\begin{array}{cc} 1 & x \\ -2 & 0 \end{array}\right]+2\left[\begin{array}{cc} -2 & 0 \\ y & 0 \end{array}\right]=\left[\begin{array}{ll} 0 & 0 \\ 0 & 0 \end{array}\right] \] \( x=-1 \) and \2 answers