Mechanical Engineering Archive: Questions from November 12, 2023
-
1 answer
-
0 answers
-
1 answer
-
1 answer
-
Problema 2 Considere una tubería de vapor DE ACERO INOXIDABLE de longitud \( L=1000 \mathrm{~m} \), radio interior \( r 1=20 \mathrm{~cm} \), radio exterior \( r 2=25 \mathrm{~cm} \). Donde \[ \begin1 answer -
1 answer
-
1 answer
-
1 answer
-
0 answers
-
1 answer
-
0 answers
-
1. Un túnel semicircular con un diámetro de \( 40 \mathrm{ft} \) se quiere construir a una profundidad de \( 150 \mathrm{ft} \) sobre un lago de longitud de \( 800 \mathrm{ft} \) como lo es mostrado1 answer -
2. Una compuerta rectangular de \( 280 \mathrm{~kg} \) y un ancho de 6 metros puede girar con respecto al punto B y se encuentra libre en el punto \( \mathrm{A} \), como lo es mostrado en la figura 21 answer -
3. Un tanque de agua presurizado tiene un orificio de \( 10 \mathrm{~cm} \) en la parte inferior del mismo donde el agua es descargada a la atmosfera. El nivel del agua se encuentra a 2.5 metros del p1 answer -
4. Un flujo de agua pasa a través de una tubería horizontal con una taza de \( 2.4 \mathrm{gal} / \mathrm{s} \). El tubo consta de dos secciones diferentes, un con un diámetro de 4 in y otro de 2 i1 answer -
1 answer
-
En la imagen está la pregunta
*11.170 El pasador \( P \) está unido a la varilla \( B C \) y se desliza libremente en la ranura de la varilla \( O A \). Determine la razón de cambio \( \dot{\theta} \) del ángulo \( \theta \), s1 answer -
1 answer
-
1 answer
-
0 answers
-
0 answers
-
1 answer
-
1 answer
-
0 answers
-
1 answer
-
Please help with the following:
1. Un eje hueco de acero de \( 1.5 \mathrm{~m} \) de longitud y diámetros de \( 110 \mathrm{~mm} \) y \( 75 \mathrm{~mm} \) se une a un eje de acero macizo de \( 90 \mathrm{~mm} \) de diámetro y \(1 answer -
La viga mostrada soporta una fuerza distribuida \( f=93 \mathrm{kN} / \mathrm{m} \). \( \mathrm{La} \) longitud \( \mathrm{L}=11.2 \mathrm{~m} \). Determine la magnitud del momento interno en \( x=5.21 answer