Paste
Copy
Cut
Options

¡Tu solución está lista!

Nuestra ayuda de expertos desglosó tu problema en una solución confiable y fácil de entender.

Mira la respuesta
  • Pregunta: A gasoline engine (ρ = 680 kg/m3) uses a carburetor to mix fuel and air. Gasoline is pumped at a rate of 6.3 cm3/s, through a pipe of 5 mm in diameter, from a tank tha bmaintains a pressure of 100 kPa. The pump discharges into a nozzle into the carburetor with a pressureOf 95 kPa. The energy losses in the system are estimated at 210 V2/ 2gV the average speed

    A gasoline engine (ρ = 680 kg/m3) uses a carburetor to mix fuel and air. Gasoline is pumped at a rate of 6.3 cm3/s, through a pipe of 5 mm in diameter, from a tank tha bmaintains a pressure of 100 kPa. The pump discharges into a nozzle into the carburetor with a pressureOf 95 kPa. The energy losses in the system are estimated at 210 V2/ 2gV the average speed in the pipe. Determine the required power of the pump in the fluid

    student submitted image, transcription available below
    Muestra el texto de la transcripción de la imagen
  • Chegg Logo
    Esta es la mejor manera de resolver el problema.
    Solución
Texto de la transcripción de la imagen:
1. Un motor de gasolina (p = 680 kg/m³) usa un carburador para mezclar el combustible y el aire. La gasolina se bombea a una tasa de 6.3 cm³/s, a través de una tubería de 5 mm de diámetro, a partir de un tanque que mantiene una presión de 100 kPa. La bomba descarga en una boquilla en el carburador con una presión de 95 kPa. Las pérdidas de energía en el sistema se estiman como 210, siendo V la velocidad media en la tubería. Determine la potencia requerida de la bomba en el fluido (35%). Carburador Hol 0.5 m 95 kPa 100 kPa Bomba