Civil Engineering Archive: Questions from July 01, 2022
-
Resuelva 1. Diseñe una mezcla de hormigón de acuerdo con las siguientes condiciones: Entorno de diseño Armazón de un edificio Resistencia de diseño requerida = 27.6 MPa Dimensión mínima = 150 m1 answer -
1. A floor system is supported by beams with a span of L=6 m, section bw = 40 cm, cast monolithically with a 15 cm thick slab. The center-to-center spacing between beams is 5 m. in the positive moment
Un sistema de piso está soportado por vigas con una luz L = 6 m, de sección bw = 40 cm, vaciadas de forma monolítica con una losa de 15 cm de espesor. El espaciamiento centro a centro entre vigas e1 answer -
3 answers
-
1. A rectangular beam has dimensions b = 40 cm and d = 34 cm. The tension reinforcement is made up of 6 Ø 1" arranged in 1 layer. To build the frame, 2 Ø ½" are placed in the compression zone. Dete
Una viga rectangular tiene dimensiones b = 40 cm y d = 32 cm. El refuerzo a tensión está constituido por 6 Ø de 1" dispuestas en 1 camada. Para construir el armazón se colocan 20%" en la zona de c1 answer -
1. A beam of b = 40 cm, h = 70 cm and 10 m length between the faces of the supports was cast monolithically with the 60 x 60 cm columns. The beam is continuous at the right support (B) and joins a col
Una viga de b = 40 cm, h = 70 cm y 10 m longitud entre las caras de los apoyos fue vaciada monolíticamente con las columnas de 60 x 60 cm. La viga es continua en el apoyo. derecho (B) y se une a una1 answer -
1 answer